electromechanical broaching machines

pulling force from 6-28 tons and stroke lengths up to 2.000 mm


FSR 9-600MZ	The technical method "Broaching" is chip cutting with a splined tool. The advantage of this method is the production of high quality surfaces in connection with very small tolerances. By means of numerous cutting edges of the broach the volume of chip production is very efficient which means quick cycle times and cheap tool costs compared to the amount of produced components.	internal profile broaching single station

Frömag electromechanical internal vertical broaching machine with loading and unloading unit	Electromechanical internal vertical broaching machine for machining of internal splines with two working stations, moveable table, loading and unloading unit with conveyor belts. Up to eight workpieces can be stacked per working station, broaching length 100 mm, cycle time 30 sec., hourly production at 96% = 1.845 workpieces on 2 broaching stations	Vertical Broaching Machine FSR9-1000MZ with three broaching stations

top


	Maschinenfabrik FRÖMAG GmbH & Co.KG Postfach 1261 D-58718 Fröndenberg	Tel +49 (0) 23 73 / 756 - 0 Fax +49 (0) 23 73 / 756 - 33 web www.froemag.com e-mail info@froemag.com

© FRÖMAG 2008